フィッシャーエレクトロニック(Fischer Elektronik)連結ソケット  一覧

mk_01.tif
  • positioning: -
for Multi-Layer, contact spring: gold-plated, one row, for Ø 0.5 mm
mk_201.tif
  • positioning: -
for Ø 0.5 mm
mk_17.tif
  • positioning: -
for Ø 0.5 mm
mk_217.tif
  • positioning: -
for Ø 0.5 mm
mk31.tif
  • positioning: -
for Ø 0.5 mm
mk231.tif
  • positioning: -
for Ø 0.5 mm
mk_12x.tif
  • positioning: -
for Ø 0.5 mm
mk_212x.tif
  • positioning: -
for Ø 0.5 mm
mk_13x.tif
  • positioning: -
for Ø 0.5 mm
mk_213x.tif
  • positioning: -
for Ø 0.5 mm
mk_06.tif
  • positioning: -
for Ø 0.5 mm
mk_07.tif
  • positioning: -
for Ø 0.5 mm
mk_207.tif
  • positioning: -
for Ø 0.5 mm
mk_lp_18.tif
  • positioning: -
Low profile, less than 2.7/3.1 mm above P.C.B. - with contact spring for Ø 0.5 mm pins, solder and plug pin Ø 0.76 mm
mk_lp_218.tif
  • positioning: -
Low profile, less than 2.7/3.1 mm above P.C.B. - with contact spring for Ø 0.5 mm pins, solder and plug pin Ø 0.76 mm
mk_lp_19.tif
  • positioning: -
Low profile, less than 2.7/3.1 mm above P.C.B. - with contact spring for Ø 0.5 mm pins, solder and plug pin Ø 0.76 mm
mk_lp_219.tif
  • positioning: -
Low profile, less than 2.7/3.1 mm above P.C.B. - with contact spring for Ø 0.5 mm pins, solder and plug pin Ø 0.76 mm
mk228thr.tif
  • positioning: -
High-precision female headers THR soldering technique for Ø 0.5 mm
po_a.tif
  • positioning: -
Peel-off, contact spring: gold-plated, number of contacts: from 2 pins to endless
sil_1.tif
  • positioning: -
Single in-line carrier
sil_2.tif
  • positioning: -
Single in-line carrier
sil_3.tif
  • positioning: -
Single in-line carrier
bl_1.tif
  • positioning: -
Stamped contact spring (fork contact), for □ 0.635 mm

separable! any requested number of contact can be delivered

bl_2.tif
  • positioning: -
Stamped contact spring (fork contact), for □ 0.635 mm
separable! Therefore any required number of contacts is available.
bl_3.tif
  • positioning: -
Stamped contact spring (fork contact), for □ 0.635 mm
separable! Therefore any required number of contacts is available.
bl_4.tif
  • positioning: -
Stamped contact spring (fork contact), for □ 0.635 mm Separable! Therefore any required number of contacts is available. packing (option) bar magazine (≥6 contacts)
bl_lp1.tif
  • positioning: -
for □ 0.635 mm
bl_lp2.tif
  • positioning: -
for □ 0.635 mm
bl_lp3.tif
  • positioning: -
for □ 0.635 mm
bl_lp4.tif
  • positioning: -
for □ 0.635 mm, packing in a bar magazine (min. 4 contacts)
bl_11.tif
  • positioning: -
□ 0.635 mm, can be put through from above and below / 260 °C Reflow
bl_12.tif
  • positioning: -
for □ 0.635 mm, can be put through from above and below
bl_21.tif
  • positioning: -
□ 0.635 mm, can be put through from above
bl_5.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
bl_6.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
bl_kg_3.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
bl_7.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
bl_8.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø, packing (option) bar magazine
mk_21.tif
  • positioning: -
□ 0.635 mm and up to 0.85 mm Ø
mk_221.tif
  • positioning: -
□ 0.635 mm and up to 0.85 mm Ø; No capilliary action when soldering due to protected contact insert.
Separable! Therefore any required number of contacts is available.
bl_9.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø, with aligned Wire-Wrap contact pins; No capilliary action when soldering due to protected contact insert.
Separable! Therefore any required number of contacts is available.
bl_10.tif
  • positioning: -
□ 0.635 mm and up to 0.85 mm Ø, with aligned contact pin
bl_13.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø, for PC 104 modules
bl_14.tif
  • positioning: -
□ 0.635 mm and up to 0.85 mm Ø, for PC 104 modules, stackthrough; No capilliary action when soldering due to protected contact insert.
Separable! Therefore any required number of contacts is available.
bl_18.tif
  • positioning: -
for □ 0.635 mm and Ø up to 0.85 mm - for PC 104 modules, One row, 1-36 contacts
bl_19.tif
  • positioning: -
for □ 0.635 mm and Ø up to 0.85 mm - for PC 104 modules, Two rows, 2-72 contacts
bl22shk1202g.tif
  • positioning: -

Turned precision female contacts

  • signal and high-power contacts
  • contacts gold-plated
  • other number of contacts / contact surface upon request
bl_lp5smd.tif
  • positioning: -
  • for □ 0.635 mm pin cross section
  • other number of contacts on request
bl_lp6smd.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
Other number of contacts on request!
... packing (option) - additions:
BL LP 6 SMD ... SM  6-40 contacts
BL LP 6 SMD ... B SM 4-40 contacts
bl_lp7smd.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
Other number of contacts on request!
... packing (option) - additions:
BL LP 7 SMD ... SM  4-20 contacts
bl_15_smd.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
bl_16_smd.tif
  • positioning: locating pin (2 pcs/bar bigger than 6 contacts)
for □ 0.635 mm and up to 0.85 mm Ø; ... packing (option) - additions:
BL 16 SMD 067 ... B TR: 4-6contacts, 500 pcs/reel
BL 16 SMD ... B TR: 6-40 contacts, 250 pcs/reel

No capilliary action when soldering due to protected contact insert. Separable…
bl_17_smd.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
bl_20_smd.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
... packing (option) - additions:
BL 20 SMD ... TR: 4-26 contacts
bl23shk1202smdg.tif
  • positioning: -

Turned precision female contacts

  • signal and high-power contacts
  • contacts gold-plated
  • other number of contacts / contact surface upon request
mk_22_smd.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
... packing (option) - additions:
MK 22 SMD ... B TR:  3-22 
contacts
mk_222_smd.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
mk24smd.tif
  • positioning: -
for □ 0.635 mm and up to 0.85 mm Ø
mk25smd.tif
  • positioning: -
for Ø 0.5 mm
mk_23_smd.tif
  • positioning: -
for Ø 0.5 mm
... packing (option) - additions:
MK 23 SMD ... B TR:  3-22 
contacts
  • one row
  • no capilliary action when soldering due to protected inner contact
  • separable! any requested number of contact can be delivered

mk_223_smd.tif
  • positioning: -
for Ø 0.5 mm
mk_220_smd.tif
  • positioning: -
for Ø 0.5 mm
... packing (option) - additions:
MK 220 SMD ... BTR  6-12 contacts; 800 pcs/reel
MK 220 SMD ... BTR 14-40 contacts; 500 pcs/reel
  • no capilliary action when soldering due to protected inner contact…
blp_1.tif
  • positioning: -
High-precision female headers □ 0,635 mm and pins up to 0,85 mm Ø; Press-fit mounting without soldering, resilient press-fit area.
blp_2.tif
  • positioning: -
High-precision female headers □ 0,635 mm and pins up to 0,85 mm Ø; Press-fit mounting without soldering, resilient press-fit area.
bl_lp9stehend_rgb.jpg
  • positioning: -
Female connectors for LED applications
  • separable! any requested number of contact can be delivered
  • insulating body made of white plastic (nature)
  • for □ 0.635 mm pin cross section, straight
bl_lp8led_smd.jpg
  • positioning: -
Female connectors for LED applications
  • separable! any requested number of contact can be delivered
  • insulating body made of white plastic (nature)
  • for □ 0.635 mm pin cross section, straight…
bl40smd2led_tr.tif
  • positioning: -
PCB connector for LED-inline modules
  • for SMD-soldering technology
  • suitable for SMD soldering processes
  • simple and save connection assembly
  • long life-cycle due to advanced contact geometries and surfaces
bl40smd4led_tr.tif
  • positioning: -
PCB connector for LED-inline modules
  • for SMD-soldering technology
  • suitable for SMD soldering processes
  • simple and save connection assembly
  • long life-cycle due to advanced contact geometries and surfaces
bl41thr2led_tr.tif
  • positioning: -
PCB connector for LED-inline modules
  • for Through-Hole-Reflow (THR) soldering technology
  • suitable for SMD soldering processes
  • simple and save connection assembly
  • long life-cycle due to advanced contact geometries and surfaces
bl41thr4led_tr.tif
  • positioning: -
PCB connector for LED-inline modules
  • for Through-Hole-Reflow (THR) soldering technology
  • suitable for SMD soldering processes
  • simple and save connection assembly
  • long life-cycle due to advanced contact geometries and surfaces
bl42rdk2led.tif
  • positioning: -
Plug-in connector for power supply of LED inline modules
  • cable connection for different types
  • for power supply of LED inline modules
  • simple and save connection assembly
  • long life-cycle due to advanced contact geometries and surfaces
bl42rdk4led.tif
  • positioning: -
Plug-in connector for power supply of LED inline modules
  • cable connection for different types
  • for power supply of LED inline modules
  • simple and save connection assembly
  • long life-cycle due to advanced contact geometries and surfaces
bly_1.tif
  • positioning: -
for □ 0.5 mm and up to 0.56 mm Ø
bly_2.tif
  • positioning: -
for □ 0.5 mm and up to 0.56 mm Ø
bly_3.tif
  • positioning: -
for □ 0.5 mm and up to 0.56 mm Ø
bly_4.tif
  • positioning: -
for □ 0.5 mm and up to 0.56 mm Ø
bly10shk1202g.tif
  • positioning: -

Turned precision female contacts

  • suitable for SLY 13 SHK 14 02 G and SLY 14 SHK 14 02 G
  • signal and high-power contacts
  • contacts gold-plated
  • other number of contacts / contact surface upon request
bly_5_smd.tif
  • positioning: -
for □ 0.5 mm and up to Ø 0.56 mm
... packing (option) - additions:
BLY 5 SMD ... B TR: 4-15 contacts
bly_6_smd.tif
  • positioning: -
for □ 0.5 mm and up to 0.56 mm Ø; BLY 6 SMD ... TR: no. of contacts: 2-20; tape width: 32 mm; reel diameter: 330 mm
bly_8_smd.tif
  • positioning: -
for □ 0.5 mm and up to 0.56 mm Ø
bly_9smd.tif
  • positioning: -
Precision contacts for □ 0.5 mm and Ø up to 0.56 mm pin cross section
blm_kg_lg1.tif
  • positioning: -
suitable for male header SLM and SLV, one row 1-36 contacts
blm_la.tif
  • positioning: -
convenable pour barette SLM, une rangée 1-36 contacts
blm_kg_lg2.tif
  • positioning: -
grid 1.27 x 2.54 mm; suitable for male header SLV, two rows 4-72 contacts
blv2_072g_8pol.jpg
  • positioning: -
  • suitable for male header SLVW 4
  • two rows 4-72 contacts
  • Vorzugspolzahlen, andere auf Anfrage
  • verzinnte Kontakte auf Anfrage
blr_1.tif
  • positioning: -
for Ø 0.35...0.45 mm
blr_2.tif
  • positioning: -
grid 1.27 x 1.27 mm; for Ø 0.35...0.45 mm
blr_3.tif
  • positioning: -
for Ø 0.35...0.43 mm
blr_4.tif
  • positioning: -
grid 1.27 x 1.27 mm; for Ø 0.35...0.43 mm
blm_1_smd.tif
  • positioning: -
wide isolation body - suitable for male header SLM and SLV, one row 4-20 contacts
blm_2_smdweb.jpg
  • positioning: -
grid 1.27 x 2.54 mm; suitable for male header SLV, two rows 4-40 contacts
blm_3_smd_.jpg
  • positioning: -
expanded insulator - suitable for male header SLV, one row 2-20 contacts, □ 0.3 mm
blr_6_smd.tif
  • positioning: -
grid 1.27 x 1.27 mm; Turned precision contacts for Ø 0.35...0.46 mm
blr_7_smd.tif
  • positioning: -
Turned precision contacts for Ø 0.35...0.45 mm; Closed precision rotary part with 3-finger contact prevents rising of flux agents. Other number of contacts on request!